Инструкция к часам касио amw 700

MA0508-EC

Getting Acquainted

Congratulations upon your selection of this CASIO watch. To get the most out of your

purchase, be sure to read this manual carefully and keep it on hand for later reference

when necessary.

Important!

The fishing/hunting level indicator and moon phase indicator produced by this watch

are all based on calculations that use the watch’s current time, date, and Home Site

settings. Because of this, you should make sure that the current date and time, and

your Home Site data are all correct before using the indicators.

• When fishing or hunting, always take proper precautions to ensure your own

personal safety and the personal safety of others around you.

• Note that the fishing/hunting level indicator and moon phase indicator are all based

on calculated values. They are provided only for reference purposes.

• See the «Timekeeping» section of this manual for information about setting the

current time and date, and about specifying your Home Site.

About This Manual

Module 3768

Module 3769

General Guide

• Press C to change from mode to mode.

• In any mode (except when a setting screen is on the display), press B to illuminate

the face of the watch.

Timekeeping

Mode

Timekeeping

Fishing/hunting level

indicator

PM indicator

Day of week

Month – Day

Hour : Minutes Seconds

Digital Time and Date

Use the Timekeeping Mode to set and view a digital display of the current time and date.

When setting the digital time, you can also configure settings for summer time

(Daylight Saving Time or DST).

To set the digital time and date

Seconds

Day

3. When the setting you want to change is flashing, use B and D to change it as

described below.

Screen

To do this:

Reset the seconds to

Toggle between Daylight Saving Time (

Standard Time (

Change the hour or minutes

Change the year

Change the month or day

Operation Guide 3768/3769

• The operational procedures for Modules 3768 and 3769

are identical. All of the illustrations in this manual show

Module 3768.

• Button operations are indicated using the letters shown

in the illustration.

• For the sake of simplicity, the sample displays in this

manual do not show the analog hands of the watch.

• Each section of this manual provides you with the

information you need to perform operations in each

mode. Further details and technical information can be

found in the «Reference» section.

Fishing/Hunting

Stopwatch

Mode

Mode

Press

.

This watch features separate digital and analog

timekeeping. The procedures for setting the digital time

and analog time are different.

• The Moon phase indicator shows the current Moon

phase in accordance with the current date as kept in the

Timekeeping Mode.

• The fishing/hunting level indicator indicates the times

when fish or game can be expected to be feeding. For

more information, see «Fishing/Hunting Mode».

Important!

• Be sure to configure the current time and date, and your

Home Site data (data for the site where you use the

watch) correctly before using the functions of this watch.

See «Home Site Data» for more information.

1. In the Timekeeping Mode, hold down A until the

seconds start to flash, which indicates the setting

screen.

2. Press C to move the flashing in the sequence shown

below to select the other settings.

DST

Hour

Month

Year

Do this:

Press D.

00

Press D.

ON

) and

OF

)

Use D (+) and B (–).

Countdown Timer

Mode

4. Press A twice to exit the setting screen.

• The first press of A displays the UTC differential setting screen. Pressing A again

exits the setting screen.

• Resetting the seconds only (without changing the DST, hour, or minute setting)

causes the analog minute hand setting to be adjusted automatically.

• See «Digital Time Daylight Saving Time (DST) Setting» below for details about the

DST setting.

• The day of the week is displayed automatically in accordance with the date (year,

month, and day) settings.

Digital Time Daylight Saving Time (DST) Setting

Daylight Saving Time (summer time) advances the digital time setting by one hour

from Standard Time. Remember that not all countries or even local areas use Daylight

Saving Time.

To toggle the Timekeeping Mode digital time between DST and Standard Time

DST indicator

On/Off status

Home Site Data

Moon phase, the fishing/hunting level indicator, and Fishing/Hunting Mode data will

not be displayed properly unless Home Site data (UTC differential and longitude) is

Minutes

configured correctly.

• The UTC differential is a value that indicates the time difference between a

reference point in Greenwich, England and the time zone where a city is located.

• The letters «UTC» is the abbreviation for «Coordinated Universal Time», which is the

world-wide scientific standard of timekeeping. It is based upon carefully maintained

atomic (cesium) clocks that keep time accurately to within microseconds. Leap seconds

are added or subtracted as necessary to keep UTC in sync with the Earth’s rotation.

• The «Site Data List» at the back of this manual provides UTC differential, latitude,

and longitude information around the world.

• The following is the initial factory default Home Site data (Tokyo, Japan) when you

first purchase the watch, and whenever you have the battery replaced. Change

these settings to match the area where you normally use the watch.

UTC differential (+9.0); Longitude (East 140 degrees)

Alarm

Dual Time

Mode

Mode

1. In the Timekeeping Mode, hold down A until the seconds

start to flash, which indicates the setting screen.

2. Press C once to display the DST setting screen.

3. Press D to toggle between Daylight Saving Time (

displayed) and Standard Time (

OF

displayed).

4. Press A twice to exit the setting screen.

• The DST indicator appears on the Timekeeping, Fishing/

Hunting, Alarm, and Hand Setting Mode screens to

indicate that Daylight Saving Time is turned on. In the

case of the Fishing/Hunting Mode, the DST indicator

appears on the fishing/hunting level screen only.

Hand Setting

Mode

ON

1

Operation Guide 3054

1

MO0606-EA

Getting Acquainted

Congratulations upon your selection of this CASIO watch. To get the most out of your
purchase, be sure to read this manual carefully.

Caution!
Your watch is shipped with it Auto Display feature (which continually changes the
contents of the digital display) turned on. Calibration signal reception is disabled while
Auto Display is turned on.
Press any button to turn off Auto Display and return to the Timekeeping Mode.

About This  Manual

• Button operations are indicated using the letters shown

in the illustration.

• Each section of this manual provides you with the

information you need in order to perform operations in
each mode. Further details and technical information
can be found in the “Reference” section.

▲

▲

Countdown Timer  Mode

Stopwatch Mode

Alarm Mode

Timekeeping Mode

Press C.

▲

World Time  Mode

▲

▲

General Guide

• Press C to change from mode to mode.

• In any mode (except when a setting screen is on the display), press B to illuminate

the display.

Radio-controlled Atomic Timekeeping

This watch receives a time calibration signal and updates
its time setting accordingly.

• Supported time calibration signals: United States (Fort

Collins), England (Rugby).

Current Time Setting
This watch adjusts its time setting automatically in
accordance with a time calibration signal. You can also
perform a manual procedure to set the time and date,
when necessary.

• The first thing you should do after purchasing this watch

is to specify your Home City (the city where you
normally will use the watch). For more information, see
“To specify your Home City”.

PM
indicator

Month – Day

Year

Day of week

Home Time
(Hour : Minutes Seconds)

• When using the watch outside the areas covered by the time signal transmitters, you

will have to adjust the current time setting manually as required. See “Timekeeping”
for more information about manual time settings.

• The U.S. time calibration signal can be picked up by the watch while in North

America. The term “North America” in this manual refers to the area that consists of
Canada, the continental United States, and Mexico.

To specify your Home City

1. In the Timekeeping Mode, hold down A until the city

code starts to flash, which indicates the setting screen.

2. Press D(east) and B(west) to select the city code you

want to use as your Home City.

• Time calibration signal reception is supported when

any one of the city codes shown in the table below is
selected as your Home City.

l l l l

ll

ll

ll

l

City code

U.S. Signal

U.K. Signal

City
Code
LIS
LON
MAD
PAR
ROM
BER
STO

City
Name
Lisbon
London
Madrid
Paris
Rome
Berlin
Stockholm

City
Code
ATH
MOW

City
Name
Athens
Moscow

City
Code
HNL
ANC
YVR
LAX
YEA
DEN
MEX

City
Name
Honolulu
Anchorage
Vancouver
Los Angeles
Edmonton
Denver
Mexico City

City
Code
YWG
CHI
MIA
YTO
NYC
YHZ
YYT

City
Name
Winnipeg
Chicago
Miami
Toronto
New York
Halifax
St. Johns

3. Press A to exit the setting screen.

Important!

• Normally, your watch should show the correct time as soon as you select your Home

City code. If it does not, it should adjust automatically after the next auto receive
operation (in the middle of the night). You can also perform manual receive or you
can set the time manually.

• The watch will receive the time calibration signal automatically from the applicable

transmitter (in the middle of the night) and update its settings accordingly. For
information about the relationship between city codes and transmitters, see “Home
City Codes and Transmitters”.

• Under factory default settings, auto receive is turned off for all of the following city

codes: HNL (Honolulu), ANC (Anchorage), ATH (Athens), and MOW (Moscow). For
details about turning on auto receive for these city codes, see “To turn auto receive
on and off”.

• You can disable time signal reception, if you want. See “To turn auto receive on and

off” for more information.

• See the maps under “Reception Ranges” for information about the reception ranges

of the watch.

• If you are in an area that does not use Daylight Saving Time (summertime), turn off

the DST setting.

Time Calibration Signal Reception
There are two different methods you can use to receive the time calibration signal:
auto receive and manual receive.
• Auto Receive

With auto receive, the watch receives the time calibration signal automatically up to
six times a day. When any auto receive is successful, the remaining auto receive
operations are not performed. For more information, see “About Auto Receive”.

• Manual Receive

Manual receive lets you start a time calibration receive operation with the press of a
button. For more information, see “To perform manual receive”.

Important!

• When getting ready to receive the time calibration signal, position the watch as

shown in the nearby illustration, with its 12 o’clock side facing towards a window.
Make sure there are no metal objects nearby.

12 o’clock

or

• Make sure the watch is facing the right way.

• Proper signal reception can be difficult or even impossible under the conditions listed

below.

• Signal reception normally is better at night than during the day.

• Time calibration signal reception takes from two to seven minutes, but in some

cases it can take as long as 14 minutes. Take care that you do not perform any
button operations or move the watch during this time.

Inside or
among
buildings

Inside a
vehicle

Near
household
appliances,
office
equipment,
or a mobile
phone

Near a
construction
site, airport,
or other
sources of
electrical
noise

Near high-
tension
power lines

Among or
behind
mountains

• The time calibration signal the watch will attempt to pick up depends on its current

Home City code setting as shown below.

Home City Code

HNL*, ANC*, YVR,
LAX, YEA, DEN, MEX,
YWG, CHI, MIA, YTO,
NYC,YHZ, YYT

LIS, LON,
MAD, PAR, ROM, BER,
STO, ATH*, MOW*

Frequency

60.0 kHz

60.0 kHz

Transmitter

Fort Collins, Colorado
(the United States)

Rugby (England)

Home City Codes and Transmitters

* The areas covered by the HNL, ANC, ATH, and MOW city codes are quite far from

the time calibration signal transmitters, and so certain conditions may cause
problems with signal reception.

Reception Ranges

Rugby

500 kilometers

U.K. Signal

1,500 kilometers

Fort Collins

600 miles
(1,000 kilometers)

U.S. Signal

2,000 miles
(3,000 kilometers)